Rode NT5 Cardioid Studio Condenser Microphones (Single Microphone)
RM 1048.00
SKU: RODE-NT5
RM 1048.00
SKU: RODE-NT5
The Rode NT5 is a small diaphragm microphone featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.
The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by leakage, monitors, additional instruments, etc. The NT5 offers a frequency response of 20 Hz to 20 kHz allowing the microphones to be used in a wide variety of applications such as drum overhead miking, stereo capturing of instruments, vocal capturing, etc. The NT5 is powered via +24V or +48V phantom power. The package includes a windscreen, mic clip, and padded zip pouch.
The cardioid polar pattern is effective in minimizing off-axis noise due to leakage, additional instruments, room ambiance, etc.
The NT5 features a frequency response of 20 Hz to 20 kHz allowing the flexibility to capture accurately in any recording or sound reinforcement scenario.
Microphone
| Primary Applications | Live Sound, Studio Recording, Audio for Video |
| Form Factor | Stand/Boom Mount |
| Intended Sound Sources | Speech/Voice Over, Overhead, Instrument |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | Condenser |
| Diaphragm | 0.5" / 12.7 mm |
| Polar Pattern | Cardioid |
| Orientation | End Address |
| Circuitry | Solid-State (JFET) |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Foam (Included) |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 143 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
| Impedance | 100 Ohms |
| Sensitivity | -38 dBV/Pa at 1 kHz |
| Output Level | 13.9 mV (Max, 1 kHz) |
| Dynamic Range | > 128 dB |
| Signal-to-Noise Ratio | 78 dB A-Weighted (1 kHz) |
| Equivalent Noise Level | 16 dB SPL A-Weighted |
Connectivity
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
Power
| Operating Voltage | 24 to 48 V (Phantom Power) |
Physical
| Color | Nickel |
| Mounting | Mic Clip/Stand Adapter (Included) |
| Included Case | Zipper Pouch |
| Included Filters | None |
| Dimensions | ø: 0.79 x L: 4.65" / ø: 20 x L: 118 mm |
| Weight | 0.2 lb / 101 g |
