RM 519.00
SKU: RODE-M3
The M3 Versatile End-Address Condenser Microphone from Rode is designed to be completely at home in the studio, on stage, or on location. It features a heavy-duty metal body and an internally shockmounted 0.5" condenser capsule. The mic can be powered with 24V or 48V phantom power or an internal 9V battery.
The microphone's -10 dB and -20 dB level attenuator pad is selectable from inside the battery compartment and allows you to record loud sources like a snare drum or guitar amplifier. A selectable high-pass filter is built into the microphone power switch that introduces a filter at 80 Hz and helps reduce low-frequency sounds and handling noise. The Rode M3 includes a windshield, a mic clip, and a zip pouch.
The Rode M3 microphone can be powered by 24 to 48V phantom power or an internal 9V alkaline battery.
The microphone's cardioid polar pattern reduces off-axis noise and maximizes gain.
A three-position pad switch maximizes headroom up to -10 dB and -20 dB.
A high-pass filter switch eliminates noise and hum at the lower frequency range.
Microphone
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Diaphragm | 0.5" / 12.70 mm |
Polar Pattern | Cardioid |
Pad | -10 dB -20 dB |
High-Pass Filter | 80 Hz |
Windscreen | Foam (Included) |
Performance
Frequency Range | 40 Hz to 20 kHz |
Maximum SPL | 142 dB SPL Peak |
Impedance | 200 Ohms |
Sensitivity | -40 dB |
Equivalent Noise Level | 21 dB A-Weighted |
THD | 1% |
Connectivity
Output Connectors (Analog) | 1 x XLR 3-Pin |
Power
Operating Voltage | 24 to 48 V (Phantom Power) 9 V (Battery Power) |
Physical
Dimensions | ø: 1.3 x L: 8.86" / ø: 33 x L: 225 |