Pre-Order
Benro BMGTATTN MeFoto GlobeTrotter Aluminum Travel Tripod Kit (Titanium)
RM 675.00
Warranty 6 Year By Local Distributor
SKU: BENRO-BMGTATTN
RM 675.00
Warranty 6 Year By Local Distributor
SKU: BENRO-BMGTATTN
The MeFoto Globetrotter Aluminum Travel Tripod Kit from Benro is a sturdy, compact tripod that extends to 64.2", supports up to 26.4 lb, and folds down to just over 16". The GlobeTrotter is actually two camera supports in one: a foam-cushioned, removable leg attaches to the center column to convert to full size monopod.
The tripod's legs can be spread independently with two-position leg angle stops. A spring-loaded ballast hook is located at the bottom of the center column, allowing a heavy object to hang from it for additional stability.
The Q2 Triple Action Arca-type ball head features separate head and pan locks, a 360° pan index, and an integral bubble level. The included quick release plate has a 1/4"-20 camera screw and rubberized pads for added traction to prevent the camera from moving and protects the finish from marring.
The MeFoto GlobeTrotter has 5 leg sections and extends to over 5.0'
Weighs 4.6 lb yet is strong enough to support a full-sized DSLR. It's a suitable choice for mirrorless cameras as well
The removable leg and center column combine to make a full-size 66.9" monopod without tools
The tripod legs can be inverted and folded back 180°. At only 16.5" when folded, this travel-friendly tripod can fit inside a backpack or suitcase
For an extra measure of flexibility, the tripod legs can be independently locked into place at two different angles to enable shooting in cramped quarters, on uneven terrain, or at low camera angles
Provides comfort and safety during long-term use
Uses the same twist-lock system as the legs for fast setup
A spring loaded recessed hook, located in the bottom of the center column, allows you to hang a heavy object from the tripod's center of gravity for increased stability
For a compact design and a wide range of height adjustments
MeFoto's rubberized locking grips combined with anti-rotation legs enable fast and fumble-free setup plus weather and dust resistance
Dual-action, heavy-duty ball head with Arca-type-compatible quick release plate
Accurate panoramas can be easily accomplished using the graduated panning scale for accurate image alignment
Individual locking knobs make adjustments easy
The bubble level in the ball head allows accurate adjustments for seamless panoramas
Each MeFoto tripod comes with its own carrying case for transport and protection
Head
| Head Type | Ball Head |
| Base Mount | 1/4"-20 Female |
| Camera Mounting Screw | 1/4"-20 Male |
| Quick Release Plate Type | PU-60 |
| Number of Bubble Levels | 1 |
| Friction Control | Yes |
| Independent Pan Lock | Yes |
Pan & Tilt Range
| Vertical Tilt | -45° to +90° |
| Panning Range | 360° |
General
| Load Capacity | 26.4 lb / 12 kg |
| Maximum Working Height | 64.2" / 163 cm |
| Max Height without Center Column | 55.1" / 140 cm |
| Minimum Working Height | 16.1" / 41 cm |
| Folded Length | 16.1" / 41 cm |
| Materials | Aluminum Alloy |
| Weight | 4.59 lb / 2.08 kg |
Legs
| Leg Lock Type | Twist Lock |
| Leg Positions | 2 Positions |
| Independent Leg Spread | Yes |
| Leg Sections | 5 |
| Leg Diameter | 0.6" / 15 mm (Minimum) 0.7" / 18.4 mm 0.9" / 21.8 mm 1.0" / 25.2 mm 1.1" / 28.6 mm (Maximum) |
| Bubble Level | No |
| Feet Features | Removable, Spiked |
Detachable Monopod
| Maximum Working Height | 66.9" / 170 cm |
| Leg Sections | 5 |
| Monopod Foot Features | Rubber, Spiked |
Center Column
| Center Column Features | Ballast Hook, Removable |
| Center Column Shape | Round |
| Center Column Sections | 1 |
| Center Column Extension Type | Rapid |
| Lateral / 90-Degree Center Column | No |
