Clearance

Phottix Mitros+ TTL Flash with Odin II TTL Trigger Kit for Canon

RM 599.00

SKU: PHOTTIX-MTTFCO2K

  Add to Cart
  Price Match

  Wishlist

The Phottix Mitros+ TTL Transceiver Flash features a built-in Odin transmitter and receiver as well as full E-TTL / E-TTL II functionality for use with Canon cameras. The Mitros+ has a guide number of 190' at ISO 100 in the 105mm position, useful for illuminating subjects within a zoom range of 24 to 105mm. Additionally, the flash features wireless transmission via an optical pulse or IR triggering and can access 4 channels and 3 groups.

This radio transmission and reception is compatible with Strato II transmitters in addition to full compatibility with the Odin-series wireless devices. Also, this Mitros+ has memory functions for saving up to three sets of flash and function information for quickly changing when needed.

The flash head has the ability to rotate 180° in each direction and tilt from -7° to +90°. This allows for excellent control over bounce angles during a shoot. Also, the Mitros+ features a recycle time from 0.1 to 5 seconds that can be improved to 2.5 seconds with a quick flash mode.

Additionally, this flash unit features full manual controls and customizable shooting options that include high-speed sync and stroboscopic shooting modes. The flash runs on 4 AA batteries and comes with an attachable diffuser for softening light when needed. Other accessories include a soft case, 3.5mm sync cable, USB cable, USB drive with manual, an adapter for external power packs, and a flash stand.

Radio transmission is compatible with Odin and Strato II wireless triggering systems up to 328' away

Wireless functionality via optical pulses in 4 channels and 3 groups with a range of up to 52.5' indoors

Ratio modes from 1:8 to 1:1 and 8:1 are available for firing multiple flash units

A modeling flash setting is available for previewing how your shot will turn out

High-speed synchronization allows you to fire using the fastest shutter speed available on your camera

A bounce card and wide-angle diffuser are built into the flash head for convenience

Stroboscopic mode fires a series of flashes at a frequency of 1-199 Hz for up to 100 flashes

Status LED lights will notify you when the flash is ready to fire

Overheating protection will slow the firing time to avoid damage from heat

AF-assist light for focusing in poor lighting conditions

Memory system for retaining your settings when the flash is powered off

3.5mm sync port for connecting this flash to a larger system

USB port for installing firmware updates

Phottix Odin II TTL Flash Trigger Transmitter for Canon

Realize the full potential of your flash setup by adding wireless triggering and control with the Phottix Odin II TTL Flash Trigger Transmitter. Compatible with Canon's E-TTL / E-TTL II flash system and equipped with a 2.4 GHz radio transmission system, the Odin II will communicate and trigger receivers or radio-capable flash units at distances up to 328'. To further benefit users, it can be used in a multi-system setup that involve Odin TTL, Strato, and Strato II receivers as well as Mitros+, Indra360, and Indra 500 lights. A major improvement over the previous model is an expansion of channels and the introduction of the Digital ID which gives further control over channels 5-32 to eliminate interference with other systems.

Embracing TTL communication between the camera and flash, automatic exposures can easily be made and more advanced users can take advantage of manual power and zoom control to dial in the exact look they need. Using the five groups, users can also control different groups and flashes with varying settings as well as mix and match TTL and manual units. All of this is easily accessed via the large LCD screen along with direct access buttons for the groups and a rotary dial for quickly adjusting settings.

Additional features include both high-speed sync for TTL flashes as well as the proprietary OverDrive Sync mode for manual studio strobes, both of which allow users to work at shutter speeds up to 1/8000 second. Also, users will be able to remotely control the modeling light of their Indra TTL strobes as well as use an AF assist light when needed. And, it has a mini-USB port for firmware updates.

TTL information transmission is possible with Odin TTL receiver, Mitros+ flash, and Indra360/500 TTL lights while manual triggering is possible with Strato and Strato II receivers

Ratio control in A:B mode from 8:1 to 1:8 in 1/2 step increments

Manual power control from 1/1 to 1/128

Ten custom functions

LED indicator light

Exposure compensation of ±3 EV in 1/3 step increments

Modeling light function

Locking foot

Runs on two AA batteries

Phottix Mitros+ TTL Transceiver Flash For Canon Cameras Specs

Flash Head

Guide Number 190.29' / 58 m at ISO 100 (105 mm Position)
Coverage Full-Frame
24 to 105 mm
14 mm (with Wide-Angle Adapter)
Bounce Head -7 to +90°
Swivel Head 360°
Recycle Time Approx. 0.1 to 5 Seconds
Secondary Illumination None

Exposure Control

Exposure Control TTL
Flash Modes Hi-Speed Sync, Second-Curtain Sync
Power Range 1/1 to 1/128 (Manual)
Flash Compensation -3 to +3 EV (1/3 EV Steps)

Wireless

Wireless Operation Optical Pulse
Up to 52.5' / 16 m
Radio
Up to 328.08' / 100 m
Wireless Channels 4
Wireless Groups 3

Power

Internal Power 4 x AA (Alkaline, NiMH)
External Power Pack Compatible Yes

General

Mount Shoe
Off-Camera Terminal 3.5 mm, Proprietary
Dimensions (W x H x D) 8 x 3.1 x 2.3" / 20.3 x 7.9 x 5.8 cm
Weight 15.06 oz / 426.95 g

Packaging Info

Package Weight 1.65 lb
Box Dimensions (LxWxH) 9.6 x 4.3 x 3.4"

Phottix Odin II TTL Flash Trigger Transmitter For Canon Specs

Wireless

Channels 32
Groups 5 (A, B, C, D, E)
Wireless Range 328' / 100 m
Radio Frequency 2.4 GHz

General

Control Modes E-TTL/E-TTL II, Manual, TTL
EV Range ±3 (1/2, 1/3 Increments)
Sync Speed 1/8000 Sec
Power Settings 1/1 to 1/128 (1/3-Stop Intervals)

Connectivity

Ports 1 x Mini-USB

Electrical

Battery Type 2 x AA

Phottix  Mitros+  TTL  Flash  with  Odin  II  TTL    Trigger  Kit  for  Canon