The Starter Tethering Kit from Tether Tools gives you all the essential gear needed to create a secure data connection between your camera and computer for a tethered workflow. This kit comes with a orange USB 3.0 cable that is equipped with a Type-A male connector on one end and a USB micro-B 10-pin male connector on the other side, making it compatible with external hard drives, memory card readers, and more. This USB 3.0 cable is 15' long and transmits data at a rate of up to 5 Gb/s.

Tether Tools includes two JerkStoppers that remove the strain placed on the computer and camera's ports from the connecting cable and help ensure the cable stays connected. For preventing tangles, ten ProTab cable ties keep the power, video, and other types of cables well managed and organized. In addition, this kit provides a Tether Tools organization case, so you can store the included cable, cable retention devices, and cable ties.

Please note that only the USB cable is covered by a limited 90-day warranty that does not guard against wear and tear.

Tether Tools TetherPro USB 3.0 Male Type-A to USB 3.0 Micro-B Cable (15', Orange)

Transfer data quickly and reliably with the 15' orange TetherPro USB 3.0 Male Type-A to USB 3.0 Micro-B Cable from Tether Tools.  This cable comes with a standard USB Type-A connection that connects to desktops, notebooks, and tablets, and a USB 3.0 micro-B interface is on board to power and transfer data for portable storage drives. The cable is fully shielded to filter out signal noise and reduce transmission errors. USB 3.0 technology provides transfer speeds of up to 5 Gbps when used with compatible devices.

Tether Tools JerkStopper Camera Support

The JerkStopper Camera Support, exclusively from Tether Tools, is the complete tethered setup that secures the cables of your camera. This kit will remove all the stress and strain placed on the cable or cord to ensure it stays plugged in and prevents cable or equipment damage. The patented JerkStopper cable retention device provides slack to cables in order to prevent accidental dislodging. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.

JerkStopper Camera Support

Specifically designed to fit all cables associated with your camera, the Jerkstopper Camera Support provides slack to cables in order to prevent damage or accidental dislodging. The JerkStopper is a versatile and inexpensive tool that could potentially save you hundreds if not thousands of dollars in preventative damage

Tether Tools JerkStopper Computer Support (USB Port)

The JerkStopper Computer Support (USB Port), exclusively from Tether Tools, allows you to create a complete tethered setup when used with a Tether Tools Camera Support (sold separately) to secure the cables of both your computer and camera. This JerkStopper Computer Support will remove all the stress and strain placed on the cable or cord to ensure that it stays plugged in and prevents cable or equipment damage.

This particular computer support model uses a spare USB port as an anchor point by allowing slack in the cord in order to prevent damage or dislodging. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.

This JerkStopper Computer Support is a versatile and inexpensive tool that could potentially save you hundreds if not thousands of dollars in preventative damage. Offered at an affordable price, you will find this JerkStopper Computer Support an invaluable resource on all your tethered photo shoots.

JerkStopper Computer Support (USB Port)

One of five different JerkStopper Computer Support models is included in this kit. This kit comes with a spare USB port. Using a spare USB port as an anchor point, the cables are provided slack and are protected against accidental dislodging

Tether Tools Cable Organization Case (Standard)

The Cable Organization Case (Standard) from Tether Tools is an easily accessible, durable storage case for all of your tethering cables, straps and cable retention devices. The standard case design is ideal to store cables and additional accessories. If you are transporting or storing cables less than 20' / 6m this case is ideal.

Features include a clear front window that enables quick and easy access to exactly what you need. Keeping all of your tethering gear together, the TetherPro Cable Case fits nicely inside your Tether Table storage bag.

• Standard size cable bag ideal for tethering cables less than 20' / 6m
• Clear front window for quick and easy access to exactly what you need
• Stay organized and keep your tethering gear together
• Fits inside the Tether Table storage bag
• Carrying handle